Search
Filters
Close

KL-92 Series Pressure Transducers

Pressure Transducer for all Chemistries The KL-92 is a pressure transducer suitable for use in monitoring pressure of various high-purity and corrosive/ aggressive fluids. The superior design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid / process. The KL-92 is available in two construction types: inline or insertion. The body construction meets IP-54 requirements.
Call for pricing

The KL-92 is a pressure transducer suitable for use in monitoring pressure of various high-purity and corrosive / aggressive fluids. The superior design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid / process. The KL-92 is available in two construction types: inline or insertion. The body construction meets IP-54 requirements.

Features:

• ± 1 % full-scale accuracy
• All PFA/PTFE wetted part construction
• No 'O'-ring seals or fill fluids
• Choice of end fitting: Flare, Pillar, 20S, MNPT, or Tube

The KL-92 is a pressure transducer suitable for use in monitoring pressure of various high-purity and corrosive / aggressive fluids. The superior design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid / process. The KL-92 is available in two construction types: inline or insertion. The body construction meets IP-54 requirements.

Features:

• ± 1 % full-scale accuracy
• All PFA/PTFE wetted part construction
• No 'O'-ring seals or fill fluids
• Choice of end fitting: Flare, Pillar, 20S, MNPT, or Tube

Material of Wetted Parts:

PFA / PTFE

Pressure Range:

0 to 50 psi, 0 to 75 psi

Allowable Maximum Pressure:

120 psi

Temperature Coefficient:

 +/- 0.05 % F.S. / deg. C

Power and Supply Current:

12-24 VDC * +/-10% ( 30 mA DC max. )

Analog Output:

Voltage Output:

0 to 10, 0 to 5, 1 to 5 VDC

Current Output:

4 to 20 mA ( 500 ohm max at 24 VDC )

Output Accuracy:

+/- 1 % F.S.

Response Time

Within 5 ms

Connection Type:

Flaretek, Super Pillar 300, Tube Ends, MNPT

Connection Sizes:

1/4” , 3/8” , 1/2” , 3/4”

Operating Temperature Range:

10 to 80°C

Operating Humidity Range:

35 to 85 % RH ( non-condensing )

Protection:

IP-54 ( Splash Proof )

Cable Length:

2 m

Weight:

140 g ( with cable )

 

For additional specification details, please refer to the product data sheet located in the documentation tab of this web page. 

  • High-purity DI water, slurry, and aggressive chemical monitoring
  • Filtration condition monitoring
  • General pressure monitoring