The life sciences industry faces a diverse set of challenges, including worker safety and particulate and microbial contamination. While applications for pharmaceutical manufacturers, medical laboratories, and research facilities are all different, they face these challenges in all their processes. Malema’s engineered solutions provide the life science industry with improved solutions that ensure safety while meeting the highest standards of cleanliness and purity.
Experienced in sensors, electronics, and process instrumentation, Malema incorporates groundbreaking state of the art technologies into every instrument.
The SumoFlo® CPFM-8100-series Single-Use Coriolis Mass Flow Meter from Malema Sensors® is specially designed for measuring liquids in bio-pharmaceutical and other applications that require USP Class VI, USP 661, and USP 788, Gamma-sterilizable materials. SumoFlo® meters provide Mass Flow Rate, Total Mass, and Temperature with accuracy ±1% of reading.
The Malema MDM-3000 Dispense Verification Meter is the first high-purity instrument to provide realtime, direct volume measurement of critical process fluids with greater speed and accuracy than possible from traditional flow meter totalizers, weight scales or
The Malema Sensors® BCV-910 Series is a line of compact, cost-effective, high-performance, pinch control valves designed for use with Single-Use flexible tubing systems in the Biotechnology and Pharmaceutical industries.
The M-VF-F Series pressure relief valve is designed with an all-PFA molded body suitable for semiconductor, ultra-pure water and aggressive chemical applications.
The CMFC-9000 Integrated Coriolis Flow Controller controls liquid and Slurry flows up to 3000 grams per minute to within 1.0% accuracy of the set point, while providing a quick response time of within 2 seconds for consistent control. Mass flow measurement is fluid independent.
“Flow Through” Pressure Transducer w/ Onboard Display
The KL95 is a “flow through” pressure transducer suitable for use in monitoring pressure of various high-purity and corrosive/aggressive fluids. The “flow through” design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid/process. The KL95 is provided with an integrally mounted local LED display and is available in two standard pressure ranges.
The M-2111 Series flow detector has non-contact transducers and a PFA flow tube design without dead pockets. Its advanced signal converter with DSP electronics offers unmatched flow measurement capabilities even in tough applications. The M-2111 is an ideal choice for use in the semiconductor industry where extreme cleanliness and anti-corrosiveness are required.
Closed Loop Integrated Flow Controller - Single Display Version.
Pressure Transducer for all Chemistries
The KL-92 is a pressure transducer suitable for use in monitoring pressure of various high-purity and corrosive/ aggressive fluids. The superior design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid / process. The KL-92 is available in two construction types: inline or insertion. The body construction meets IP-54 requirements.
The VF-8100 consists of an inline flow sensor and electronics in one package. The flow sensor is a straight-through PFA tube that uses ultrasonic sensing technology to measure the flow rate. There are no moving parts or mechanical seals. The VF-8100 is an ideal choice for use in the semiconductor industry where minimal footprint, high purity and corrosion resistant wetted parts are required.
The M-100X Series is an extremely sensitive explosion-proof flow switch. It has been engineered to monitor vital sample flow parameters for instrumentation in process control and inert blanket gases. It is used as an auxiliary alarm monitor for flow meters.